Welcome

This instruction will show you how to install the LATTE+ milk system. Original instructions - published 05-2026

Before you start

Carefully read the "Safety instructions and environmental information" provided with the machine.

Intended use of the appliance

Animo appliances are exclusively designed for producing hot drinks. Accompanying accessories such as milk systems are intended to be used adjacent to the appliances. All Animo appliances are intended to be installed and used indoors. All appliances are intended to be used in households and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments
• Farm houses
• By clients in hotels, motels and other residential type environments
• Bed and breakfast type environments
• Catering and similar non-retail applications 

All appliances must be installed, used and maintained as described in the accompanying manuals. Only use the appliance if it is in a perfect mechanical condition and only for the purpose for which it is intended.

SAFETY

• Before use, check the Animo appliances for completeness and damage. Damage must be repaired by Animo, Its dealer or other qualified professionals.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• All users have to understand the hazards involved in using this appliance.
• Parts of the appliance may become very hot during use. Do not touch these parts.

TECHNICAL DATA

The LATTE+ milk system is designed for preparing perfect milk foam in combination with the Animo Optibean X and Optime X coffee machines.

Milk cooler type MC8DBS manufactured by Suzhou Seitek Cooling System Ltd. is part of the LATTE+ milk system. The name plate of the milk cooler is located inside the milk cooler.

• External dimensions: 240 (W) x 450 (D) x 530 (H) mm.
• Volume: 4.5 litres/ 2 x 2,3 litres (or max. 4 1-litre packs)
• Refrigerant/amount: R600a/10.5 g
• Electrical connection: 220-240V/50-60 Hz/2900 W
• Use at elevation above sea level: < 2,000 M 
• Place milk system in an adequately ventilated room. Keep away from heat sources, such as radiators or air conditioning pipes. Allow free air circulation to the refrigerator unit.
• Noise emission < 70 dB
• Weight: 21 Kg.
• Ambient conditions: humidity max. 80%, ambient temperature: 10 - 32°C (50-90°F).

CHECK THE CONTENTS:

• LATTE+ Milk system (Art. No. 1013099)
• LATTE+ Cleaning container including lid (Art. No. 1013333)
• 3 x Milk hose 6x3, 460 mm. (Art. No. 1013552, 2 including 2 x filter (Art. No. 1013310)
• 2 x 90-degree outlet (Art. No. 1007194)
• Hose connector (Art. No. 1013570)
• Locking clip, black (Art. No. 1004673)
• Cap, black, 14.3 mm. (Art. No. 1001899)
• Cap, black, 17 mm. (Art. No 9008088)
• Drip tray connection (Art. No. 1011380)
• 4 x high feet, 40 mm. (Art. No. 1011464), including 4 x caps (Art. No. 9007952)
• Power cable, 150 cm. (Art. No. 1002864)
• Power cable, internal, 50 cm. (Art. No. 1013560)
• Quick coupling milk stop, (Art. No. 1001175)
• 2 keys (Art. No. 1013559)
• Hose, PE, black, 5.000 mm. (Art. No. 101355). Cut the hose to the desired length yourself.
• Drain hose coffee machine, silicon, 1500 mm., (art. No. 1010119)
• RS485 data cable, 1000 mm. (Art. No. 1013344)
• Female adapter G3/8 - 8. (Art. No. 1013554)
• 2 x Female adapter, G3/4 - 8. Elbow (Art. No. 1013557)
• 2 x tube elbow, 90°, 8 x 8 (Art. No. 1013558)
• Tube elbow, 90°, 6 x 8 (Art. No. 1013556)
• Two way divider 8 x 8 mm. (Art. No. 1013555)
• 9 x Locking clip 8 mm. (Art. No. 1010024)
• OptiClean alkaline milk system cleaning tablets, 85 pc. (Art. No. 1013547)
• OptiClean acid milk system cleaning tablets, 40 pc. (art. No. 1013548)
• Safety instructions and environmental information (Art. No. 1010143) 
• Welcome booklet (Art. No. 1011479) 

The LATTE+ milk system can only be used in combination with Animo coffee machines of the OptiMe X and Optibean X types.

Milk system does NOT work with other types or brands.

To use the Latte+ milk system, it is necessary to place the coffee machine on 40 mm feet and connect the drip tray to the drain.

1. Tilt the coffee machine backward.

2. Remove the 2 front feet.

1. Place feet into the raised feet (Art. No. 1011464)
2. Place the ring (Art. No. 9007952) into the bottom of the raised feet. 

1. Screw the assembled raised feet into the base of the coffee machine.
2. Place the machine upright again.

Tilt the coffee machine forwards and repeat this for the feet at the back of the coffee machine.

Connect the drip tray to the drain

1. Tilt the coffee machine backward.

2. Click the drip tray connection (Art. No. 1011380) into the opening in the base plate. Place the machine upright again.

Connect the drip tray to the drain

1. Tilt the coffee machine forward.
2. Slide the silicone tube (Art. No. 1010119,18x12, L 1500 mm.) over the drip tray connection. Place the machine upright again.
3. Guide the hose to the drain.

Remove the protective foil from the LATTE+ milk system.

The LATTE+ milk system is suitable for two types of milk (or plant-based alternatives).

1. Guide milk hose 1 (Art. No. 1013552, 6x3, L=460 mm. including filter Art. No. 1013310) from the milk cooler to the milk system.
2. Do the same for milk hose 2 if you want to use two types of milk (or plant-based alternatives).

Connect the milk hose (Art. No. 1013552, 6x3, L=460 mm.) to the milk inlet ‘MILK-IN’ No. 1. 

Skip this step if you are going to use one type of milk:

Connect milk hose 2 (Art. No. 1013552, 6x3, L=460 mm.) to milk inlet 'MILK-IN' No. 2 if you wish to use two types of milk.

If you use one type of milk (or plant-based alternative):

Remove the milk transfer tube from the 'MILK-IN" No. 2: press on the edge and simultaneously pull out the milk transfer tube.

Place the quick coupling milk stop (Art. No. 1001175) in milk inlet 'MILK-IN" No. 2 to close this outlet.

The milk system is now suitable for one type of milk.

Connect milk hose (Art. No. 1013552, 6x3, L=460 mm.) to the milk outlet "MILK OUT"

In the situation shown in the photo, only one type of milk is used.

Insert the milk hose connector (Art. No. 1013570) into the lower hole for use with the OptiMe X (OMX) coffee machine.

Insert the hose connector into the upper hole for use with the Optibean X (OBX). 

Secure the hose connector with the locking clip (Art. No. 1004673).

Seal the unused hole using the caps provided.

Use the 14.3 mm cap (Art. No. 1001899) for the inside and the 17 mm cap (Art. No. 9008088) to seal the outside of the fridge.

Feed out the milk hose. The milk system has two feed out options:

- Feed out the milk hose through the bottom opening (OMX) for use with the OptiMe X coffee machine.

- Feed out the milk hose through top opening (OBX) for use with the OptiBean X coffee machine.

Remove the cap from the side wall of the coffee machine.

Guide the milk hose from the LATTE+ milk system through the side wall of the coffee machine.

Position the LATTE+ milk system next to the coffee machine. 

The milk hose connector of the Latte+ fits into the hole in the coffee machine.

Place 90-degree outlet (Art. No. 1007194) on end of milk hose.

Place the 90-degree outlet (Art. No. 1007194) onto the spout of the coffee machine.

At the rear of the LATTE+ milk system:

Connect the adaptor for the water supply hose (Art. No. 1013557) to the 'WATER INLET' of the LATTE+ milk system.

Press the tube elbow (Art. No. 1013558) into the adaptor.

1. Press the hose (Art. No. 1013551 mm) into the elbow. Cut the hose to the desired length.
2. Secure the hose and elbow with the locking clip (Art. No. 1010024).

Connect the adaptor for the water supply hose (Art. No. 1013557) to the water inlet of the coffee machine.

Press the tube elbow (Art. No. 1013558) into the adaptor.

1. Press the hose (art. No. 1013551, 000 mm.) into the elbow. Cut the hose to the desired length.
2. Secure the hose and elbow with the locking clip (Art. No. 1010024).

1. Insert both hoses into the two way divider (Art. No. 1013555).
2. Secure the hoses with the locking clip (Art. No. 1010024).

1. Insert water hose (Art. No 1013555, 2000 mm.) into the two way divider. Cut the hose to the desired length.
2. Secure the hoses with the locking clip (Art. No. 1010024).

1. Press the end of the water hose into the adapter (Art. no. 1013554).
2. Secure the hose with the locking clip (Art. No. 1010024).

Connect water hose to your water filter.

Follow the instructions provided with your water filter.

Press the tube elbow (Art. No. 1013556) to the 'DRAIN' of the LATTE+ milk system.

1. Press the hose drain (Art. No. 1013551 mm.) into the elbow. Cut the hose to the desired length.
2. Secure the hose and elbow with the locking clip (Art. No. 1010024).

Feed the drain hose to your waste water drain.

Connect the power cable (Art. No. 1013560, 500 mm.) to the milk system.

Connect the other end of the power cable to the lower part of the cooling unit.

Connect the data cable (Art. No. 1013344 mm.) from the LATTE+ milk system to the coffee machine.

Connect the LATTE+ to an earthed power socket. (Art.No. 1002864, 150 mm.)

Switch on the milk frothing system

• Once switched on, the LATTE+ milk system will start to operate. Note that a certain amount of time is needed the system reaches the required internal temperature. This depends on external conditions as well as on the thermostat setting.
• The temperature is set to about 4 °C by default. 
• We recommend to insert milk inside the milk frothing system only if the internal temperature has stabilized. Once switched on, the LATTE+ milk system will start to operate. Note that a certain amount of time is needed the system reaches the required internal temperature. This depends on external conditions as well as on the thermostat setting.

Your LATTE+ milk system is installed and ready to use.

Before using the LATTE+ milk system system, you must clean the system.

Before you start:

• Carefully read the "Safety instructions and environmental information" provided with the machine.
• Wash your hands thoroughly.

For the cleaning process you will need:

• OptiClean Alkaline milk system cleaning tabs for daily cleaning (Art. No. 1013547)
• LATTE+ Cleaning container including lid. (Art. No. 1013333)
• Cleaning container (Art. No. 1003827)
• Cleaning wipe 

On the touchscreen: Select the machine menu ☰  

or open the door if the menu icon is not visible.

Select ‘CLEAN’ 

The steps on the screen will guide you through the cleaning procedure.

Select 'CLEAN MILK SYSTEM'

Click Next to continue.

Select 'DETAILED INSTRUCTIONS'

Ensure that you have activated 'Detailed instructions'. The steps on the screen will guide you through the procedure.

Click Next to continue.

Place an empty container below the outlet.

Click Next to continue.

REMOVE MILK CONTAINER

Make sure the milk cooler is empty.

Click Next to continue.

Place the OptiClean alkaline milk system cleaning tablet in the cleaning container.

Click Next to continue.

1. Place milk hose(s) in the cleaning container
2. Place cleaning container in milk cooler
3. Slide the cleaning container into the guide!
4. Close door of LATTE+ milk system.
5. Tab Next to continue

Wait while the system cleans the milk system.

This will take about 8 minutes.

The milk system has been cleaned.

1. Open door.
2. Remove the cleaning container from the milk cooler.
3. Remove the hoses from the cleaning container.
4. Empty cleaning residue in sink.
5. Click Next to continue.

Clean the milk hose(s) with a clean cloth.

Click Next to continue.

If you are using transparent plastic milk containers, clean them thoroughly first.

Milk containers are available as accessories:

• One container, 4.5 litres (Art. No. 1013383)
• Two milk containers, 2.3 litres (Art. No. 1013384)

If you are using transparent plastic milk containers:

1. Place hoses in milk container(s)
2. Place milk container(s) in milk system
3. Close door
4. Click Next to continue.

1. Remove the waste container.
2. Empty cleaning residue in sink.
3. Click Next to continue.

The cleaning process is stored in the HACCP cleaning schedule.  

• Click √ to finish

After a few seconds, the screen will automatically return to the start screen with the drinks overview.

Cleaning is ready.

These instructions show you step by step how to use the control panel on the milk cooler.

Before you start, carefully read the "Safety instructions and environmental information" provided with the machine.

The temperature control is preset from the factory. Factory settings temperature: 4 ℃

POWER Button

Turn on

Press the POWER button for 1 second to turn on.

Turn off

Press the POWER button for 3 seconds to turn off.

After turning off, the backlight of the POWER button will change to a breathing light state and the display will turn off.

Setting mode

Lightly click once to set cabinet temperature. The lower row temperature display number starts to flash, and displays the setting temperature.

Press "arrow up" or "arrow down" to adjust the temperature.

Cabinet temperature set range 2~6℃, factory setting 4℃.

Arrow down botton

In setting mode, used to decrease. In each click, the value is decreased by 1℃; After 2s’ long press, it continues to decrease.

Arrow up/LAMP Button

In setting mode, used to increase. In each click, the value is increased by 1; after 2s’long press, it continues to increase.

In non-setting mode, click lightly, turn on or off LED light.

LCD Screen

Temperature display:

• show the setting temperature, when in setting mode, it flickeringly shows setting temperature.
• When in shutdown condition, there is no LCD display.

Unlock and Lock

• In lock condition, lightly click any button to unlock.
• In unlock condition, automatic locking after 30 S without any operation meanwhile.

4 touch buttons have backlight, which goes out in lock condition and lights up in unlock condition.

Before you start:

1. Carefully read the "Safety instructions and environmental information" provided with the machine.
2. Wash your hands thoroughly.
3. Make sure you do not touch the milk or plant-based alternatives with your hands.

On the touchscreen: Select the machine menu ☰  

or open the door if the menu icon is not visible.

Fill the milk system:

Select ‘Fill left’ to prepare the milk system for dispensing milk foam.

The steps on the screen will guide you through the procedure.

If you are using two types of milk, fill the left-hand milk container first:

1. Open door
2. Carefully remove the milk container from the milk cooler.
3. Fill the left container with cold milk.

1. Slide the milk container back in the milk system.
2. Close door.
3. Click Next to continue.

The machine is now being prepared to dispense milk foam via the left milk container.

Are you using two types of milk (or plant-based alternatives)?

Go to operator menu and select ‘Fill Right’ to prepare the milk system for dispensing milk foam from the right-hand milk container.

Click Next to continue.

Carefully remove the right milk container from the milk cooler.

Fill the right-hand container with cold milk or plant based alternative.

1. Slide the right-hand milk container back in the milk system.
2. Close door.
3. Click Next to continue.

The milk system is now being filled.

The LATTE+ milk system is now filled and ready to serve drinks.

Before you start, carefully read the "Safety instructions and environmental information" provided with the machine. 

This instruction shows the steps for daily cleaning:    

1. Remove milk container(s).
2. Place cleaning container with milk cleaning tablet.
3. Start the cleaning process.

Clean the LATTE+ Milk System daily after use. Cleaning the milk system takes about 10 min.   

For the cleaning process you will need:

• OptiClean Alkaline milk system cleaning tabs for daily cleaning (Art.No. 1013547)
• LATTE+ Cleaning container including lid. (Art.No. 1013333)
• Cleaning container
• Cleaning wipe. 

On the touchscreen: Select the machine menu ☰  

or open the door if the menu icon is not visible.

Select ‘CLEAN’. 

The steps on the screen will guide you through the cleaning procedure.

Select 'CLEAN MILK SYSTEM'

If you also wish to clean the coffee system at the same time, please select ‘COFFEE SYSTEM’ as well.

To clean the coffee system, follow the detailed instructions of your coffee machine's Swipe Guide.

Click Next to continue.

Select 'DETAILED INSTRUCTIONS'

Ensure that you have activated 'Detailed instructions'. The steps on the screen will guide you through the procedure.

Click Next to continue.

1. Place an empty container below the outlet.
2. Click Next to continue.

1. Open door of LATTE+ milk system.
2. Remove milk container(s).
3. Remove milk tube(s) from milk container(s).
4. Click Next to continue.

1. Place the alkaline milk cleaning tablet in the cleaning container.
2. Click Next to continue.

1. Place milk hose(s) in the cleaning container.
2. Place cleaning container in milk cooler.
3. Slide the cleaning container into the guide!
4. Close door of LATTE+ milk system.
5. Click Next to continue.

WAIT while the system cleans the milk system.

This will take about 8 minutes.

The milk system has been cleaned.

1. Open door.
2. Remove the cleaning container from the milk cooler.
3. Empty cleaning residue in sink.
4. Remove the hose(s) from the cleaning container.
5. Click Next to continue.

1. Clean the milk hose(s) with a clean cloth.
2. Click Next to continue.

Clean milk containers.

1. Replace hoses in milk container(s).
2. Replace milk container(s) in milk system.
3. Close door.
4. Click Next to continue.

Attention! Ensure that the milk tube is at the bottom of the milk container.

1. Remove the waste container.
2. Empty cleaning residue in sink.
3. Click Next to continue.

The cleaning process is stored in the HACCP cleaning schedule.  

Click √ to finish.

After a few seconds, the screen will automatically return to the start screen with the drinks overview.

Cleaning is ready.

Before you start, carefully read the "Safety instructions and environmental information" provided with the machine.

This instruction shows the steps for weekly cleaning:    

1. Remove milk container(s).
2. Place cleaning container with milk cleaning tablet.
3. Start the cleaning process.

Clean the LATTE+ Milk System weekly using an acid cleaning tab. Cleaning the milk system takes about 10 minutes.

For the cleaning process you will need:

• OptiClean Acid milk cleaning tabs (Art. No. 1013548) for weekly cleaning
• LATTE+ Cleaning container including lid (Art. No. 1013333)
• Cleaning container (Art. No. 1003827)
• Cleaning wipe.

On the touchscreen: Select the machine menu ☰  

or open the door if the menu icon is not visible.

Select ‘CLEAN’. 

The steps on the screen will guide you through the cleaning procedure.

Select 'CLEAN MILK SYSTEM'.

If you also wish to clean the coffee system at the same time, please select ‘COFFEE SYSTEM’ as well.

To clean the coffee system, follow the detailed instructions of your coffee machine's Swipe Guide.

Click Next to continue.

Select 'DETAILED INSTRUCTIONS.'

Ensure that you have activated 'Detailed instructions'. The steps on the screen will guide you through the procedure.

Click Next to continue.

1. Place an empty container below the outlet.
2. Click Next to continue.

1. Open door of LATTE+ milk system.
2. Remove milk container(s).
3. Remove milk tube(s) from milk container(s).
4. Click Next to continue.

1. Place the OptiClean Acid milk system cleaning tablet in the cleaning container.
2. Click Next to continue.

1. Place milk hose(s) in the cleaning container.
2. Place cleaning container in milk cooler.
3. Slide the cleaning container into the guide!
4. Close door of LATTE+ milk system.
5. Click Next to continue.

WAIT while the system cleans the milk system.

This will take about 8 minutes.

The milk system has been cleaned.

1. Open door
2. Remove the cleaning container from the milk cooler.
3. Empty cleaning residue in sink.
4. Remove the hose(s) from the cleaning container.
5. Click Next to continue.

1. Clean the milk hose(s) with a clean cloth.
2. Click Next to continue.

Clean milk containers.

1. Replace hoses in milk container(s).
2. Replace milk container(s) in milk system.
3. Close door.
4. Click Next to continue.

Attention! Ensure that the milk tube is at the bottom of the milk container.

1. Remove the waste container.
2. Empty cleaning residue in sink.
3. Click Next to continue.

The cleaning process is stored in the HACCP cleaning schedule.  

Click √ to finish.

After a few seconds, the screen will automatically return to the start screen with the drinks overview.

Cleaning is ready.

Before you start, carefully read the "Safety instructions and environmental information" provided with the machine.

This instruction shows the steps for Monthly maintenance:

• Clean inside cabinet of milk system
• Clean the condenser 
• Do not use sharp objects for cleaning.

Before cleaning the cooler always remember to unplug it.

Unplug the cooler at the electrical outlet. Never pull the service cord.

Clean the inside cabinet of milk system with a clean damp cloth or with neutral soap. 

Avoid damage by never using abrasive or flammable cleaning products.

Clean the condenser at least once a month with a vacuum cleaner or a brush to eliminate the dust accumulation.

Connect the power cable.

The Milk system is ready to use.

If the LATTE+ milk frothing system is left to operate for a very long period of time, it is possible for ice to form on its inside walls.

If the ice becomes considerably thick, it is advised to defrost the milk system in order to continue to guarantee good appliance efficiency and to avoid higher electricity consumption.

Before you start:

• Wash your hands thoroughly or wear gloves 
• Carefully read the " Safety instructions and environmental information" provided with the machine.

Switch off the LATTE+ Milk system.

Take the milk containers / milk packs out of your milk system and place them in a fridge.

Open the door of your milk system and leave it open for abt. 60 minutes.

Clean and dry thoroughly the inside walls of the milk system.

Put the milk hoses back into the milk containers through the lid.

Place the milk containers back.

Close the door and switch on the milk system.

The Milk system is ready to use.

Instruction for drain kit with Smart Connection for drip tray to drain pipe, 1.5 m. Article No.: 0000000

Check the contents of the package:

- Compression spring 

- Bolt  

- Plastic cap 

- Plastic component - ????

- Rubber hose - ????

Remove the drip tray from the machine.

At the back of the drip tray: Punch out the perforated part for the liquid drain.

Attention: Make sure that the opening is clear. Remove the scraps with a knife or sandpaper.

1. Insert the bolt in the spring. 
2. Insert the bolt with the spring in the plastic component in the hole at the back of the drip tray.

Place the rubber ring on the plastic bolt.

1. Insert a hex key in the bolt. 
2. Screw the plastic cap on bolt in the drip tray. 

Place the drip tray back in the machine.

You are done.

OPTICLEAN MILK SYSTEM CLEANING TABLETS

For optimal performance and hygiene, the system is designed to be used with OptiClean cleaning tablets. Damage or malfunction caused by the use of other cleaning agents is not covered under warranty.

As the manufacturer of LATTE+, Animo, we strongly advise using the specially developed cleaning product OptiCean Milk Cleaning Tabs. This product has been tested with the LATTE+ and ensures reliable cleaning of the internal milk frothing system.

• Automatic Check: During the cleaning cycle, the device automatically verifies whether the cleaning product is present in the system.
• System Lock: If no cleaning product is detected, the milk frothing system will be automatically blocked to ensure hygienic and safe operation.
• Use of Other Products: Using alternative cleaning products may prevent the system from detecting the cleaning agent, and the cleaning procedure may not function correctly.

Risks of Insufficient Cleaning

• Build-up of bacteria or mold in the milk frothing system.
• Poor milk froth quality or altered taste of milk products.
• Potential health risks for users from consuming contaminated milk products.
• Reduced device lifespan and possible malfunctions due to contamination of internal pipes and components.

OptiClean, daily and weekly Milk Cleaning tabs

• To maintain optimal hygiene and performance of the milk frothing system, daily cleaning with alkaline milk-cleaning tablets is required. These tablets effectively remove fresh milk residues and prevent buildup in the internal components.
• In addition, a weekly cleaning cycle using an acidic milk-cleaning tablet is recommended. This deeper cleaning step helps dissolve mineral deposits and stubborn residues that cannot be removed with daily alkaline cleaning alone.

Following this cleaning schedule ensures consistent beverage quality, reduces the likelihood of system malfunctions, and contributes to the long-term reliability of the equipment.

Where to buy

For optimal performance and hygiene of your milk frothing system, Animo recommends using specially developed cleaning products, such as OptiCean Milk Cleaning Tabs.

You can find an overview of all recommended cleaning products on our website: animo.eu/cleaning-agents

Sales of these products are handled through authorized Animo dealers. Purchasing through an authorized dealer ensures that you receive original products that have been tested and are suitable for your device..

• 1013547 - OPTICLEAN ALKALINE MILK SYSTEM CLEANING TABLETS

Ean – 8715476046903

• 1013548 - OPTICLEAN ACID MILK SYSTEM CLEANING TABLETS

Ean – 8715476046910

Safety Data Sheets

All safety data sheets (SDS) for the cleaning tablets can be downloaded from the Animo's website. 

Please refer to these documents for detailed safety and handling information.